AD-NODE-L1
The AD-NODE is designed for those requiring precision in their analogue and digital measurements. The AD-NODE supports:
- 2 x 0–1.5 V inputs
- 1 x thermistor input
- 1 x 4–20 mA input
- 4 x Dry-contact digital inputs (capable of simultaneously sampling at 1 kHz, with periodic reporting)
The AD-NODE is ideally suited to the following applications, and sensors:
- Dendrometry, supporting up to 2 x DBV60 Band Dendrometers.
- Soil Moisture, supporting 1 x MP406
- Microclimate, supporting the ATH-2A for accurate air temperature and relative humidity
- Water level, supporting the ECL 8439 Submersible Pressure Transmitter
Settings on the device can be altered remotely via LoRaWAN™ or locally via USB.
Details
Specifications
Details
The AD-NODE is designed for those requiring precision in their analogue and digital measurements. With a 24-bit ADC, the AD-NODE supports two RTDs, a 0–10V with compressing range and a 4–20mA input. Each of the four dry-contact digital inputs is capable of simultaneously sampling at 1 kHz, with periodic reporting. Settings on the device can be altered remotely via LoRaWAN™ or locally via USB.
Specifications
- LoRaWAN™ low-power long-range connectivity
- 1x 24-bit Thermistor
- 2x 24-bit Voltage input (0-1.5 V)
- 1x 24-bit 4-20 mA, with 12 volt DC Excitation (0.360 Watts maximum)
- 4x 32-bit dry-contact counting digital inputs
- 400 Hz 3-Axis Accelerometer
- 3 x AA Lithium battery
- Fully reconfigurable via LoRaWAN™ downlinks
