Instrument software downloads

Notes:

msi files are instrument software install/update files.
fub files are instrument firmware update files via the Device Firmware Updater (DFU) Utility.
Software and firmware auto-update instructions

ICT Instrument	Software	Firmware
MPKit	Version: 1.0.0.6 Release Date: 18/01/2012 Download: ICT-MPM-SW-R1-0-0-6.msi	Version: N/A Release Date: N/A Download:
PSY1 Psychrometer	Version: 2.0.3.7 Release Date: 23/01/2012 Download: ICT-PSY-SW-R2-0-3-7.msi Required Minimum Firmware: R1-4-3	Version: R1-5-0 Release Date: 20/12/2011 Download: PSY7192_0005_R1-5-0_20122011.fub
SFM1 Sap Flow Meter	Version: 2.0.4.4 Release Date: 22/02/2012 Download: ICT-SFM-SW-R2-0-4-4.msi Required Minimum Firmware: R1-4-5	Version: R1-5-5 Release Date: 22/11/2011 Download: HRM_0002_R1-5-5_22112011.fub
ICT Instrument	Version: 1.0.6.5 Release Date: 24/01/2012 Download: ICT-IS-SW-R1-0-6-5.msi Required Minimum Firmware: R1-1-7	Version: R1-3-3 Release Date: 09/02/2012 Download: VSL_0009_R1-3-3_09022012.fub
Utility Software
Device Firmware Updater (DFU) Utility	ict-dfu-r1-7-0-7.msi
USB driver	ict-usb-driver.exe

Microsoft System Minimum Requirements

Notes:
DotNet Framework is a free software supplied by Microsoft in all Operating Systems. Dependent upon the age of your PC and the way in which it was configured at the time of manufacture the DotNet software may not have been installed as part of the standard operating system.

ICT International utilises the DotNet programming environment to run the ICT utility software and therefore requires that it be installed on the PC prior to installing the ICT utility software. The ICT installation wizard automatically checks your PC's configuration and will prompt you if DotNet is not installed or an older version of DotNet is installed on your PC. In either case you will need to install DotNet3.5 before proceeding and completing the installation of the ICT utility software. This is a free software download from the Microsoft web site. ICT has provided the direct Hyperlink for your convenience. Note: the full redistributable download file (300MB) has been provided for you on the ICT Software DVD that came with your instrument and can also be found on the Micro SD card installed in your Instrument.

These links are provided as a convenience should you not be able to find the dotNet install file in either of these locations. DotNet Framework is a minimum requirement. Only install if required to. The following are links to an external site and may change without notice. If the links below are not functional, then search Microsoft Downloads (Download page)

Microsoft .NET Framework 3.5 (EXE file) (Download page)
Windows Installer 3.1 Redistributable (Download page)

ICT International Pty Ltd P.O Box 503, Armidale, NSW, 2350, Australia Ph: +61-2-6772 6770

ICT International has provided monitoring solutions for soil, plant and environmental research since 1982.
© 2003-2011, ICT International