Logging:

• Stand-alone logging
• MicroSD expandable memory
• Wireless connectivity and data transfer
• Simple conversion and scripting
• Flexible sensor calibration, look-up tables, and user scripts
• 24-Bit resolution
• IP68 rated water proof enclosure
• Free Windows utility configuration software
• Optional wireless logging via MCC1    

Power management:

• Field: solar power and 12V battery
• Lab: main power supply
• Internal Lithium-Polymer battery
• Internal voltage regulation
• Optical isolation lightening protection

Meter Specifications

Instrument Logging
Instrument Specification Brochure
Analogue Channels	5 double ended or 10 single ended
Resolution	0.00001V—24-Bit
Accuracy	0.001V
Minimum Logging Interval	1 second
Delayed Start	Suspend Logging, Customised Intervals
Sampling Frequency	10Hz
Data
Communications	USB, Wireless Radio Frequency 2.4 GHz
Data Storage	MicroSD Card, SD, SDHC & SDXC Compatible (FAT32 format)
Software Compatibility	Windows XP, Vista and Windows 7
Data Compatibility	FAT32 compatible for direct exchange of SD card with any Windows PC
Data File Format	Comma Separated Values (CSV) for compatibility with all software programs
Memory Capacity	2GB expandable to 64GB
Operating Conditions
Temperature Range	-40 ° C to +80 ° C
R/H Range	0-100%
Upgradable	User Upgradeable firmware using USB boot strap loader function
Power
Power supply	12V DC 2-wire non polarized bus
Power Consumption	20 mA
Internal Battery Monitoring	Logging internal battery voltage & charging current
Charging Rate	Automatic variable rate of charging to maximise solar panel charging current on full sun days and or under low light cloudy conditions Variable current 10 mA to 200 mA

Associated Sensors

The TSM can support up to 5 x Everest Interscience Infrared Thermometers. The Thermistor Sensor Meter (TRM) can support up to 9 x Thermistors. For all sensors temperature is recorded as degrees Celsius.
Temperature (Thermistor) Sensors - Use with TRM (Thermistor Sensor Meter)
Therm-SS	Thermistor strings available Stainless steel embodied thermistor Standard cable lengths: 5m, 30m, 50m Custom lengths available Measurement range: - 50 to 105°C Accuracy: ±0.05°C Resolution: 0.01°C
Therm-EP	Thermistor strings available Epoxy embodied thermistor Standard cable lengths: 5m, 30m, 50m Custom lengths available Measurement range: - 40 to 80°C Accuracy: ±0.05°C Resolution: 0.01°C
ICTLT	Micro scale measurements of temperature Non-destructive sampling of leaf temperature Measurement range: - 40 to +125°C Accuracy: ±0.2°C Resolution: 0.01°C
Temperature (Voltage) Sensors - Use with TSM (Temperature Sensor Meter)
IRT4000	Everest Interscience Infrared Sensor Highly accurate with automatic corrections based on subject radiation and shy radiation Measurement range: - 40 to +100°C Accuracy: ±0.5°C Resolution: 0.1°C
Note: TSM can also measure solar radiation or PAR radiation of the crop canopy at the same time as Infrared temperature.

• Plant physiology (leaf and canopy temperature)
• Soil, air and fluid temperature
• Thermistor strings for borehole monitoring
• Concrete temperature during drying
• Building energy use studies

• The TSM and TRM are fully self-contained units requiring power input from a 7W solar panel (field applications) or 12V power supply (glasshouse applications).
• The TSM and TRM are stand-alone instruments and do not need extensive cables and power requirements. All data is stored within the unit on a removable SD card.
• Communication with the TSM and TRM are made either with a USB or wireless connection. Wireless is compatible up to 250m distance.
• In conjunction with an ICT web-based controller, the TSM, TRM and/or individual sensors can be controlled remotely. Real-time, live measurements can be made remotely from any location with internet access. Data can be logged directly onto a remote computer or stored in the field on an ICT log server which can then be accessed via the internet.
• The TSM and TRM have a Windows configuration software. The software is GUI based and extremely user-friendly. Custom calibration equations or data can be entered and edited via the software. Real-time measurements, diagnostics and sensor configuration can easily be made.
• The TSM and TRM have 2 wire, non-polarized bus for power input. There is no chance of incorrect wiring of positive and negative voltage because the TSM and TRM are non - polarized.
• The TSM and TRM have an internal lithiumpolymer battery that is kept charged by an external power supply (solar panel or mains). The instrument has an internal voltage regulation for maximum power reliability.
• The TSM and TRM are IP-68 rated and have been demonstrated to operate in extreme environmental conditions. Units are being used in diverse environments from hot Australian deserts, tropical Amazon rainforests, temperate German forests, Indian agricultural fields and North American Arctic cold.

Overview

ICT International instruments have customised software support. The software acts as an interface between the user, instrument and sensors. Each instrument has software pre-configured for the sensors it supports.

Look up Table

A look-up table is a linear conversion from a mV output from the sensor into any conversion units. A minimum of two values are needed: the lowest mV output and the highest mV output.

Script

For more complex conversions, such as exponential, logistic or polynomial equations, users can enter a script.

Self Calibration

Individual sensors can be calibrated using the ICT International software. A minimum three point calibration curve is required. Statistical analysis of calibrated data is automatically performed. Calibration curves can be saved, retained and modified. Calibration of individual sensors allows absolute precision data collection.

Communication

MCC

• Wireless communication with any ICT International instrument within 250m.
• Portable, easy to use via ICT International software interface.
• Connects directly into any Windows based computer via USB cable.
• Multiple channel ports, such as SDI-12, RS232, RS485, SI8, ICT-BUS & ICT Wireless Protocols, for highly flexible interfacing between ICT International instruments and third party devices.

ICT Instrument The ICT Instrument is pre-calibrated and can support up to ten sensors.
Breakout board Sensors, connect to the meter via a Pelican box for maximum environmental protection. Depending on sensor requirements, a maximum of 5 or 10 sensors can be connected.
Windows configuration software Custom calibration equations or data can be entered and edited via the software. Real-time measurements, diagnostics and sensor configuration can easily be made.
USB cable
Removable Micro SD card plus adapter Data stored internally on a 2GB removable micro-SD card. Memory can handle months to years of data. Expandable to 4GB, 8GB or 16 GB micro-SD cards.
Solar panel / CH7 Power Supply (optional) Field Applications: 7W Solar Panel (standard) 11W Solar Panel (high demand) 12V Battery (recommended, not supplied) Solar charger regulator (recommended with solar panel) Laboratory / Glasshouse Applications: CH7, 12V Switch-mode power adapter (Note: must be 12V power input)
MCC Wireless Device (optional) Communication with the meter is made either with a USB or wireless (MCC) connection. Wireless is compatible up to 250m distance.

Individual Calibration of Sensors

Calibration of the sensors is carried out using the ICT Instrumentation Software provided free with the ICT Data Logger. If your computer is connected to the internet the software will automatically check for any updates when you run the program. Connect your computer to the logger using the methods described in the manual provided, and start the ICT Instrument Software.

Read More ...