S-NODE
The S-NODE has been designed to support the broad suite of SDI-12 based environmental sensors and includes four on-board sensor inputs and the capacity to support additional sensors which are bussed externally. With a power system based upon either a 6.5 Ah or 13A h rechargeable lithium-ion battery or external DC power source, the S-NODE can support those sensors with higher power requirements.
Compatible sensors can be found below in the accessories tab, whilst system that use the S-Node can be found in Recommended Products.
LoRaWAN provides capability for full remote configuration through downlinks, including enabling/disabling confirmed messaging and changing the report interval. LTE Cat M1/Cat NB1/EGPRS provides the option for remote installation in areas outside the range of LoRaWAN networks.
Fully encrypted data communications, with JSON or csv files transmitted over MQTT(S) to a user-defined broker with dedicated MQTT support Microsoft Azure Iot Hub.
With the option of LoRaWAN or CAT M1/NB-IoT connection, the S-NODE is an ideal upgrade for older data loggers that relied on 3G communications as the network shutdown is approaching for those data networks. Please contact ICT International to discuss further your requirements, sales@ictinternational.com.au.
- Choice of CAT-M1 / NB-IoT communications or LoRaWANâ„¢ low-power long-range connectivity
- AS923, AU915, EU868 and US915 available, with other region plans available upon request.
- Internal Lithium-ion, rechargeable by solar panel or external 12V or 24V DC power options
- External solar/battery input: 12-32V DC.
- Standard IP65 enclosure, optional IP67
- Supports the full range of SDI-12 commands, and sensors requiring constant excitation.
| Battery: | 6.7Ah Lithium-Ion rechargeable. Optional 13.4Ah. |
| Battery Life: | Up to 1 week without charge, dependant upon sensor configuration. |
| External Power Supply: | 12-32V DC, 11W or 22W Solar Panel, or 12V mains supply. |
| SDI-12 Commands Supported: | Measurement (M), Concurrent (C), Result (R). Other SDI-12 commands can be sent manually from the device (eg: change address, sensor specific commands). |
| Configuration: | Command line based, Windows 10, Mac and Linux compatible. |
| SDI-12 Sensor Capacity: | 4 standard, up to 10 with SDI-12 break-out box. |
| LoRaWAN Features: | OTAA & ABP (Over the Air Activation or Activation by Personalisation), Adaptive Data Rates, Confirmed Messaging, Public/Private networks. |
| Upload Interval: | From 1 second, user configurable. |

IoT Plant Monitoring Station (SDI-12)

Apogee Extended Photosynthetically Active Radiation (ePAR) Sensors and Meters

Apogee Full-Spectrum Quantum PAR Sensors and PAR Meters

Apogee Infrared Radiometers

Apogee NDVI Sensors

Apogee Net Radiometer

Apogee Original Quantum (PAR) Sensor

Apogee PAR-FAR Sensors

Apogee Photochemical Reflectance Index (PRI) Sensors

Apogee Photometric Sensors

Apogee Quantum Light Pollution Sensor

Apogee Radiation Frost Detector

Apogee Red – Far-Red Sensors

Apogee Silicon-cell Pyranometers

Apogee UV Sensors

AWQ-CTZN Inductive Conductivity/Salinity Sensor

AWQ-DO Sensor for Dissolved Oxygen

AWQ-NTU Optical Sensor for Nephelometric Turbidity

AWQ-pH Combination pH/Redox/Temp sensor

AWS Multiparameter Weather Sensor

Band Dendrometers

AWQ-C4E Digital Conductivity/Salinity Sensor

DP40 Pivot Dendrometer


